Supermicro MBD-X10DAL-i-o
THÔNG SỐ KỸ THUẬT
Product SKUs | |
MBD-X10DAL-i | X10DAL-i |
Physical Stats | |
Form Factor | ATX |
Dimensions | 12″ x 10″ (30.48cm x 25.4cm) |
Processor/Cache | |
CPU | Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4. |
Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s | |
Cores / Cache | Up to 22 cores † / Up to 55MB† cache |
Note | † BIOS version 2.0 or above is required |
Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
System Memory | |
Memory Capacity | 256GB ECC RDIMM, DDR4-2400MHz, in 8 DIMM slotsUp to 1TB ECC 3DS LRDIMM |
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | RDIMM: 4GB, 8GB, 16GB, 32GB |
LRDIMM: 32GB, 64GB | |
3DS LRDIMM: 128GB | |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors |
On-Board Devices | |
Chipset | Intel® C612 |
SATA | Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
SCU SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
Network Controllers | Dual LAN with Intel® i210 Gigabit Ethernet Controller |
Audio | 7.1 HD Audio |
Input / Output | |
SATA | 10 SATA3 (6Gbps) port |
LAN | 2 RJ45 Gigabit Ethernet LAN ports |
USB | 3 USB 2.0 ports (2 headers, 1 Type A) |
6 USB 3.0 ports (4 rear + 2 headers) | |
Serial Port / Header | 1 COM Port (1 header) |
TPM | 1 TPM Header |
Expansion Slots | |
PCI-E | 2 PCI-E 3.0 x16 (in x16 slot), |
1 PCI-E 3.0 x8 (in x16 slot), | |
1 PCI-E 3.0 x4 (in x8 slot) | |
1 PCI-E 2.0 x4 (in x8 slot) | |
System BIOS | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) |
PCI 2.3 | |
ACPI 1.0 / 2.0 / 3.0 / 4.0 | |
USB Keyboard support | |
SMBIOS 2.7.1 | |
UEFI 2.3.1 | |
Management | |
Software | SuperDoctor® 5, Watchdog |
Power Configurations | ACPI Power Management |
Power-on mode for AC power recovery | |
PC Health Monitoring | |
Voltage | +12V, +3.3V, +5V, +5V standby, 3.3V standby, 5 Phase-switching voltage regulator, VBAT |
FAN | 7x 4-pin fan headers (up to 7 fans), 7 fans with tachometer status monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control |
Temperature | Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
LED | CPU / System Overheat LED |
Other Features | Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC |
Operating Environment | |
Operating Temperature Range | 10°C – 35°C (50°F – 95°F) |
Non-Operating Temperature Range | -40°C – 70°C (-40°F – 158°F) |
Operating Relative Humidity Range | 8% – 90% (non-condensing) |
Non-Operating Relative Humidity Range | 5% – 95% (non-condensing) |
Nếu cần hỗ trợ thêm, vui lòng liên hệ với chúng tôi.
Đánh giá
Chưa có đánh giá nào.