Supermicro MBD-X10DRG-Q-B
THÔNG SỐ KỸ THUẬT
| Product SKUs | |
| MBD-X10DRG-Q | X10DRG-Q |
| Physical Stats | |
| Form Factor | Proprietary |
| Dimensions | 15.2″ x 13.2″ (38.61cm x 33.53cm) |
| Processor/Cache | |
| CPU | Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4. |
| Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s | |
| Cores / Cache | Up to 22 cores / Up to 55MB† cache |
| Note | BIOS version 2.0 or above is required |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| System Memory | |
| Memory Capacity | 16x 288-pin DDR4 DIMM slots , |
| Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM | |
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB |
| LRDIMM: 32GB, 64GB | |
| 3DS LRDIMM: 128GB | |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
| Chipset | Intel® C612 |
| SATA | RAID 0,1,5,10 |
| Intel® C612 controller for 6 SATA3 (6 Gbps) ports; | |
| AHCI SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SCU SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
| ASPEED AST2400 BMC | |
| Network Controllers | Dual LAN with Intel® i350 Gigabit Ethernet Controller |
| Single LAN with Virtual Machine Device Queues reduce I/O overhead | |
| Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
| Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) | |
| Audio | HD Audio with optical S/PDIF |
| Graphics | Aspeed AST2400 BMC |
| Input / Output | |
| SATA | 10 SATA3 (6Gbps) port |
| LAN | 1 RJ45 Gigabit Ethernet LAN ports |
| 2 RJ45 Gigabit Ethernet LAN ports | |
| USB | 4 USB 2.0 ports (2 rear + 2 headers) |
| 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) | |
| Video Output | 1 VGA port |
| Serial Port / Header | 2 COM Ports (1 rear, 1 header) |
| TPM | 1 TPM Header |
| Others | Thunderbolt AOC Header |
| Expansion Slots | |
| PCI-E | 4 PCI-E 3.0 x16, |
| 1 PCI-E 3.0 x8 (in x16 slot), | |
| 1 PCI-E 3.0 x8 Or 2 PCI-E 3.0 x8 (in x16 slot) | |
| 1 PCI-E 2.0 x4 (in x8 slot), | |
| (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) | |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) |
| PCI 2.3 | |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 | |
| USB Keyboard support | |
| SMBIOS 2.7.1 | |
| UEFI 2.3.1 | |
| Management | |
| Software | Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, SPM, SUM, SuperDoctor® 5, Watchdog |
| Power Configurations | ACPI Power Management |
| CPU Fan auto-off in sleep mode | |
| Power-on mode for AC power recovery | |
| PC Health Monitoring | |
| Voltage | +12V, +3.3V, +5V, +5V standby, 10 (4-pin), 6 Phase-switching voltage regulator, Chassis intrusion header, Memory Voltages, Monitors for CPU Cores |
| FAN | 10x 4-pin fan headers (up to 10 fans), 10x fans with tachometer monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control |
| Temperature | Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI |
| LED | CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID |
| Other Features | Chassis intrusion detection, Chassis intrusion header, Dual Cooling Zones, RoHS |
| Operating Environment | |
| Operating Temperature Range | 10°C – 35°C (50°F – 95°F) |
| Non-Operating Temperature Range | -40°C – 70°C (-40°F – 158°F) |
| Operating Relative Humidity Range | 8% – 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% – 95% (non-condensing) |
Để biết thêm thông tin vui lòng liên hệ với chúng tôi.


Đánh giá
Chưa có đánh giá nào.