Supermicro MBD-X11DPL-i-o
THÔNG SỐ
|
Product SKUs
|
|
| MBD-X11DPL-i | X11DPL-i |
| Physical Stats | |
| Form Factor | ATX |
| Dimensions | 12.076″ x 10.15″ (30.67cm x 25.78cm) |
| Processor/Cache | |
| CPU | 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors |
| Dual Socket LGA-3647 (Socket P) supported, CPU TDP support Up to 140W TDP, 2 UPI up to 10.4 GT/s | |
| System Memory | |
| Memory Capacity | Up to 2TB 3DS ECC RDIMM, DDR4-2933MHz; Up to 2TB 3DS ECC LRDIMM, DDR4-2933MHz, in 8 DIMM slots |
| Memory Type | 2933/2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM |
| DIMM Sizes | RDIMM: 64GB |
| LRDIMM: 128GB | |
| 3DS LRDIMM: 128GB, 256GB | |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices | |
| Chipset | Intel® C621 |
| SATA | Intel® C621 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| IPMI | ASPEED AST2500 |
| Network Controllers | Dual LAN with 1GbE with Intel® X722 + Marvell 88E1512 |
| Graphics | Aspeed AST2500 BMC |
| Input / Output | |
| SATA | 10 SATA3 (6Gbps) port |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports |
| USB | 4 USB 2.0 ports (2 rear + 2 via headers) |
| 3 USB 3.2 Gen1 ports (2 via headers + 1 Type A) | |
| Video Output | 1 VGA port |
| Serial Port / Header | 1 COM Port (1 header) |
| TPM | 1 TPM Header |
|
Expansion Slots
|
|
| PCI-E | 2 PCI-E 3.0 x16, |
| 3 PCI-E 3.0 x8, | |
| 1 PCI-E 3.0 x4 (in x8 slot) | |
| M.2 | M.2 Interface: 1 SATA/PCI-E 3.0 x4 |
| Form Factor: 2260, 2280 | |
| Key: M-Key | |
| System BIOS | |
| BIOS Type | AMI UEFI |
| Management | |
| Software | Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog |
| Power Configurations | ACPI Power Management |
| PC Health Monitoring | |
| Voltage | +12V, +3.3V, +5V, +5V standby, 3.3V standby, 8 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility |
| FAN | 8x 4-pin fan headers (up to 8 fans), Overheat LED indication, PWM fan speed control |
| Temperature | CPU thermal trip support, PECI |
| LED | CPU / System Overheat LED, UID/Remote UID |
| Other Features | ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Node Manager Support, SDDC, UID |
| Operating Environment | |
| Operating Temperature Range | 10°C – 35°C (50°F – 95°F) |
| Non-Operating Temperature Range | -40°C – 70°C (-40°F – 158°F) |
| Operating Relative Humidity Range | 8% – 90% (non-condensing) |
| Non-Operating Relative Humidity Range | 5% – 95% (non-condensing) |
Để biết thêm chi tiết vui lòng liên hệ với chúng tôi.


Đánh giá
Chưa có đánh giá nào.