QSAN XCubeSAN XS1212

Liên hệ

The Most Cost-Effective SAN Storage Solution
The XCubeSAN XS1200 series is the newest of the XCubeSAN Series available from QSAN
Active-active dual controller SAN (Storage Area Network) storage system series, supporting both iSCSI IP-SAN and FC-SAN with high performance
Simplifies the SAN deployment in the IT infrastructure, combining enterprise essential features such as thin provisioning, SSD read/write cache, auto tiering, snapshot, local volume clone, remote replication, scalable to PB level capacity, etc., in one box.

Add to wishlist

Mô tả

QSAN XCubeSAN XS1212

HARDWARE
RAID Controller	Dual-active controller (Model : XS1224D / XS1216D / XS1212D / XS1226D) Single-upgradable controller (Model : XS1224S / XS1216S / XS1212S / XS1226S)
Processor	Intel^® 2-core processor
Memory (per Controller)	DDR4 ECC 4GB, up to 32GB (two DIMM slots, insert two DIMMs or more will boost performance) * To support QCache, the minimum memory per controller is 8GB
Host Connectivity (per Controller)	Host Card Slot 1 (optional) 4 x 16Gb FC (SFP+) ports 2 x 16Gb FC (SFP+) ports 4 x 10GbE iSCSI (SFP+) ports 2 x 10GbE iSCSI (RJ45) ports 4 x 1GbE iSCSI (RJ45) ports Host Card Slot 2 (optional) 4 x 16Gb FC (SFP+) ports (Slot 2 provides 20Gb bandwidth) 2 x 16Gb FC (SFP+) ports (Slot 2 provides 20Gb bandwidth) 4 x 10GbE iSCSI (SFP+) ports (Slot 2 provides 20Gb bandwidth) 2 x 10GbE iSCSI (RJ45) ports 4 x 1GbE iSCSI (RJ45) ports Onboard 2 x 10GBASE-T iSCSI ports 1 x 1GbE management port
Expansion Connectivity (per Controller)	Built-in 2 x 12Gb/s SAS wide ports (SFF-8644)
Drive Type	XS1224 / XS1216 / XS1212 Mix & match 3.5″ 2.5″ SAS, NL-SAS, SED HDD 2.5” SAS, SATA SSD (6Gb MUX board needed for 2.5″ SATA drives in dual controller system) XS1226 2.5″ SAS, NL-SAS, SED HDD 2.5” SAS, SATA SSD (6Gb MUX board needed for 2.5″ SATA drives in dual controller system)
Expansion Capabilities	Up to 10 expansion units using XD5300 series 12Gb SAS expansion enclosure XD5324 (4U 24-bay, LFF) XD5316 (3U 16-bay, LFF) XD5312 (2U 12-bay, LFF) XD5326 (2U 26-bay, SFF)
Max. Drives Supported	XS1224 (4U 24-bay, LFF) : 284 XS1216 (3U 16-bay, LFF) : 276 XS1212 (2U 12-bay, LFF) : 272 XS1226 (2U 26-bay, SFF) : 286
Dimension (H x W x D)	19” Rackmount XS1224 (4U 24-bay, LFF) : 170.3 x 438 x 515 mm XS1216 (3U 16-bay, LFF) : 130.4 x 438 x 515 mm XS1212 (2U 12-bay, LFF) : 88 x 438 x 515 mm XS1226 (2U 26-bay, SFF) : 88 x 438 x 491 mm
Memory Protection	Cache-to-Flash module (optional) Battery backup module + Flash module (to protect all memory capacity) Super capacitor module + Flash module (to protect up to 16GB memory per controller)
LCM (LCD Module)	USB LCM (optional)
Power Supply	80 PLUS Platinum, two redundant 770W (1+1) AC Input 100~127V 10A, 50-60Hz 200~240V 5A, 50-60Hz DC Output +12V 63.4A +5VSB 2.0A
Fan Module	2 x hot pluggable/redundant fan modules
SOFTWARE
Storage Management	RAID level 0 ,1 ,0+1 ,3 ,5 ,6 ,10 ,30 ,50, 60, and N-way mirror RAID EE level 5EE, 6EE, 50EE, and 60EE Flexible storage pool ownership Thin Provisioning (QThin) with space reclamation SSD Cache (QCache¹) Auto Tiering (QTiering¹) Global, local, and dedicated hot spares Write-through and write-back cache policy Online disk roaming Spreading RAID disks drives across enclosures Background I/O priority setting Instant RAID volume availability Fast RAID rebuild Online storage pool expansion Online RAID level migration Online volume extension Online volume migration² Auto volume rebuilding Instant volume restoration SED & ISE drive support Video editing mode for enhanced performance Disk drive health check and S.M.A.R.T. attributes Storage pool parity check and media scan for disk scrubbing SSD wear lifetime indicator Disk drive firmware batch update
iSCSI Host Connectivity	Proven QSOE 2.0 optimization engine CHAP & mutual CHAP authentication SCSI-3 PR (Persistent Reservation for I/O fencing) support iSNS support VLAN (Virtual LAN) support Jumbo frame (9,000 bytes) support Up to 256 iSCSI targets Up to 512 hosts per controller Up to 1,024 sessions per controller
Fibre Channel Host Connectivity	Proven QSOE 2.0 optimization engine FCP-2 & FCP-3 support Auto detect link speed and topology Topology supports point-to-point³ and loop Up to 256 hosts per controller
High Availability	Dual-Active (Active/Active) SAN controllers Cache mirroring through NTB bus ALUA support Management port seamless failover Fault-tolerant and redundant modular components for SAN controller, PSU, FAN module, and dual port disk drive interface Dual-ported HDD tray connector Multipath I/O and load balancing support (MPIO, MC/S, Trunking, and LACP) Firmware update with zero system downtime
Security	Secured Web (HTTPS), SSH (Secure Shell) iSCSI Force Field to protect from mutant network attack iSCSI CHAP & mutual CHAP authentication SED & ISE drive support
Storage Efficiency	Thin Provisioning (QThin) with space reclamation Auto Tiering (QTiering¹) with 3 levels of storage tiers
Networking	DHCP, Static IP, NTP, Trunking, LACP, VLAN, Jumbo frame (up to 9,000 bytes)
Advanced Data Protection	Snapshot (QSnap), block-level, differential backup Writeable snapshot support Manual or schedule tasks Up to 64 snapshots per volume Up to 64 volumes for snapshot Up to 4,096 snapshots per system Remote Replication (QReplica) Asynchronous, block-level, differential backup based on snapshot technology Traffic shaping for dynamic bandwidth controller Manual or schedule tasks Auto rollback to previous version if current replication fails Up to 32 schedule tasks per controller Volume clone for local replication Configurable N-way mirroring Integration with Windows VSS (Volume Shadow Copy Service) Instant volume restoration Cache-to-Flash memory protection¹ M.2 flash module Power module: BBM (Battery Backup Module) or SCM (Super Capacitor Module) Support USB UPS and network UPS with SNMP management
Virtualization Certification	Server Virtualization & Clustering Latest VMware vSphere certification VMware VAAI for iSCSI & FC Windows Server 2016, 2012 R2 Hyper-V certification Microsoft ODX Latest Citrix XenServer certification
Easy Management	USB LCM¹, serial console support, online firmware update Intuitive Web management UI, secured web (HTTPS), SSH (Secured Shell), LED indicators S.E.S. support, S.M.A.R.T. support, Wake-on-LAN, and Wake-on-SAS
Green & Energy Efficiency	80 PLUS Platinum power supply Wake-on-LAN to turn on or wake up the system only when necessary Auto disk spin-down
Host Operating Systems Support	Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016 SLES (SUSE Linux Enterprise Server) 10, 11, 12 RHEL (Red Hat Enterprise Linux) 5, 6, 7 CentOS (Community ENTerprise Operating System) 6, 7 Solaris 10, 11 Free BSD 9, 10 Mac OS X 10.11 or later
WARRANTY & REGULATORY
Warranty	System : 3 years Battery backup module : 1 year Super capacitor module : 1 year
Regulatory	CE, FCC, BSMI, VCCI, KCC
OPERATING ENVIRONMENT
Temperature	Operating temperature : 0 to 40°C Shipping temperature : -10 to 50°C
Relative Humidity	Operating relative humidity : 20% to 80% non-condensing Non-operating relative humidity : 10% to 90%

¹ The function is optional and is not included in the default package.
² The feature is based on RAID level migration of disk groups on the fly in thick provisioning pools.
³ 16Gb Fibre Channel only supports Point-to-Point topology.

Chia sẻ với bạn bè